Sectional / Overhead Doors

Spima can supply overhead sectional doors of all types and sizes according to your requirements. Standard sandwich panel thickness of 40mm is the norm but if needed, an 80mm thick panel can be supplied for doors in areas of temperature controlled zones where insulation is required. Aluminium profiled sections with transparent acrylic glass are also available.

In other applications where space is limited the Cube door is the perfect solution.

Industrial door with thermal break.

T40 ISO - A40 ISO

Industrial door with thermal break.

The HS is an unusual space-saving rail system. The door first opens vertically and then moves into the building close to the ceiling.

HS (High lift system)

The HS is an unusual space-saving rail system. The door first opens vertically and then moves into the building close to the ceiling.

S40 is the most frequently used overhead door panel. The S40 is a universally applicable panel, made in steel.

S40 panel (40mm)

S40 is the most frequently used overhead door panel. The S40 is a universally applicable panel, made in steel.

Parklio™ Brain is a universal electronic module that will turn any existing products into a smart one.

Smartphone door activation / opening

Parklio™ Brain is a universal electronic module that will turn any existing products into a smart one.

The VS is a rail system where the door travels vertically.

VS (vertical system)

The VS is a rail system where the door travels vertically.

The S80 is an 80-mm thick steel sandwich panel that is fully thermally separated and as such offers an energy efficient solution.

Thermally insulated S80 panel (40mm)

The S80 is an 80-mm thick steel sandwich panel that is fully thermally separated and as such offers an energy efficient solution.

The NS is a standard rail system where the door moves horizontally behind the daylight opening.

NS (normal system)

The NS is a standard rail system where the door moves horizontally behind the daylight opening.

The LS is a rail system that is pre-eminently suitable for use when top clearance is limited. The system is available in three variants, for top clearances of 200, 250 or 320 mm.

LS (Low system)

The LS is a rail system that is pre-eminently suitable for use when top clearance is limited. The system is available in three variants, for top clearances of 200, 250 or 320 mm.

The T40 model is a steel sandwich panel.

T40 panel (40mm)

The T40 model is a steel sandwich panel.