top of page

Home > Doors > Sectional Doors

SECTIONAL / OVERHEAD DOORS

Η Spima μπορεί να προμηθεύσει σπαστές / βιομηχανικές θύρες διατομής όλων των τύπων και μεγεθών σύμφωνα με τις απαιτήσεις σας. Το τυπικό πάχος πάνελ σάντουιτς 40 mm είναι ο κανόνας, αλλά αν χρειαστεί, μπορεί να παρέχεται πάνελ πάχους 80 mm για πόρτες σε περιοχές ελεγχόμενης θερμοκρασίας ζωνών όπου απαιτείται μόνωση. Διατίθενται επίσης τμήματα με προφίλ αλουμινίου με διαφανές ακρυλικό γυαλί.

 

Σε άλλες εφαρμογές όπου ο χώρος είναι περιορισμένος, η πόρτα Cube είναι η τέλεια λύση.

Industrial door with thermal break.
T40 ISO - A40 ISO

Industrial door with thermal break.

The VS is a rail system where the door travels vertically.
VS (vertical system)

The VS is a rail system where the door travels vertically.

The S80 is an 80-mm thick steel sandwich panel that is fully thermally separated and as such offers an energy efficient solution.
Thermally insulated S80 panel (40mm)

The S80 is an 80-mm thick steel sandwich panel that is fully thermally separated and as such offers an energy efficient solution.

The NS is a standard rail system where the door moves horizontally behind the daylight opening.
NS (normal system)

The NS is a standard rail system where the door moves horizontally behind the daylight opening.

The LS is a rail system that is pre-eminently suitable for use when top clearance is limited. The system is available in three variants, for top clearances of 200, 250 or 320 mm.
LS (Low system)

The LS is a rail system that is pre-eminently suitable for use when top clearance is limited. The system is available in three variants, for top clearances of 200, 250 or 320 mm.

The T40 model is a steel sandwich panel.
T40 panel (40mm)

The T40 model is a steel sandwich panel.

The HS is an unusual space-saving rail system. The door first opens vertically and then moves into the building close to the ceiling.
HS (High lift system)

The HS is an unusual space-saving rail system. The door first opens vertically and then moves into the building close to the ceiling.

S40 is the most frequently used overhead door panel. The S40 is a universally applicable panel, made in steel.
S40 panel (40mm)

S40 is the most frequently used overhead door panel. The S40 is a universally applicable panel, made in steel.

The A40 overhead door is constructed from horizontal maintenance-free aluminium sections featuring finger safe protection.
A40 panel (40mm)

The A40 overhead door is constructed from horizontal maintenance-free aluminium sections featuring finger safe protection.

bottom of page