Loading Bridges
WHEEL RAMPS
These wheel ramps are made to safely increase the height of low vehicles to allow easier loading from a loading bay. They are lightweight and are easily moved around using the castor fitted to the front plate.
Type BB bridge plate
his bridge plate is designed to eliminate minor height differences on a railway platform. It is not hinged, but rotates within a steel guide rail. The guide rail is available in black or galvanized steel. It should be welded to the the edge of a dock with installed channel section with a face height of a min.of 120 mm.
Type AWB
AWB bridge plates are fabricated from aluminium plate with a five-bar tread anti-slip surface.
Type AOS-F
Ideal for loading small wheel containers such as Danish trolleys and flight cases. Available as one wide ramp or a more versatile pair.
Type HFB 55 / 60
Both of these types of ramp are designed for use where there is a very small difference in levels. They are fabricated from one Aluminium profile.
Loading Ramps
Type AOS
AOS ramps have been designed to provide the maximum load capacity in their range, with the slimmest of profiles and with the lowest possible unit weight in maintenance free aluminium.The standard AOS design includes integral reinforcement.
Type ABS
This aluminium ramp offers an excellent balance between a very low weight and a high load capacity.
EVENT RAMPS
The event ramp has been designed especially for the loading of trolleys or cases with small wheels.
Wheel Chair Ramps
Type SBS
SBS bridge ramps are designed as standard to span door steps or thresholds up to 35 mm high and 120 mm wide.
Type ABS-Z
In case of small luggage space, the three times foldable ABS ramps are an ideal solution.